EasyBUS
iSMY System
Accessories
Keypads
DIM KPN2
The DIM KPN2 is a microcontroller-based dimmer module featuring two 2 A power outputs, configurable in either leading edge or trailing edge mode for the control of 230VAC lighting fixtures.
Designed for incandescent, halogen, and dimmable LED lighting, it is compatible with loads powered directly from 230VAC or via conventional or electronic transformers.
The selectable control modes allow the module to adapt to different lighting technologies, ensuring reliable performance and precise light intensity control.
2 Channels Marine Dimmer Module 230VAC
- 2 power outputs configurable as dimming or on/off outputs at 230VAC, with last-state memory
- Selectable control mode: leading edge / trailing edge
- 8 programmable dry contact inputs
- Advanced electronic short-circuit and overload protection
- Optoisolation between the power stage and the control electronics
- DIP switches for operating mode configuration
- DIN rail mounting (6 modules)
- Pluggable terminal blocks
- Protective conformal coating
The module features 8 inputs compatible with push buttons, sensors, and any other dry contact devices. The inputs can be configured for output control in either dimming or on/off mode.
The DIP switch configuration allows up to two outputs to be connected in parallel, increasing the maximum available output current up to 4 A.
| Electronic power supply | 11-28VDC |
| Maximum electronic requirements | 1,2W (50mA @24VDC, 100mA @12VDC) |
| Power supply for dimmer outputs | 12/24VDC |
| Output power supply | 6A each |
| Dimensions (W x H x D) | 53x58x90mm (3 M) |
Download
- Datasheet
- Manual
- cad
