YBR 50 AC

Tubular motor with electronic limit switches and an integrated Yachtica EasyBUS interface located in the motor head. Designed to provide precise and reliable control of motorized blinds, it allows complete configuration of all operating functions through Yachtica Cabot software, including synchronization and automatic alignment of multiple motors installed within the same environment.

The motor features dry contact inputs, allowing standalone operation even in the absence of EasyBUS communication, ensuring continuous system operation. Soft Start and Soft Stop functions are electronically controlled and enable customized acceleration and deceleration profiles near the end positions, ensuring smooth movement while reducing mechanical stress.

Its exceptionally quiet operation and minimal vibration levels provide outstanding acoustic comfort. The compact dimensions allow installation even in confined spaces while simplifying wiring compared to traditional solutions. The motor is also designed for continuous operation, delivering high performance without the risk of overheating.

Tubular Motor 100–240 VAC

Encoder
Electronic limit switches
Soft Start / Soft Stop
Dry contacts
Extremely quiet operation
100–240 VAC, 6 Nm, 20 rpm
Diameter: 35 mm

The motor features an advanced electronic control system that enables complete configuration of all operating parameters through Yachtica Cabot software. Via the EasyBUS system, it is possible to configure the electronic limit switches, manage the Soft Start and Soft Stop functions, synchronize multiple motors, and optimize operation according to the specific installation requirements.

The advanced control logic ensures smooth movement, precise alignment, and reliable operation even with multiple motors, different load conditions, or intensive use. Thanks to the integrated dry contact inputs, the motor remains fully operational even in the absence of EasyBUS communication.

The combination of advanced electronic control, exceptionally quiet operation, and minimal vibration levels delivers high performance, outstanding acoustic comfort, and long-term reliability.

Electrical specifications

Power supply (Vac/Hz)	100-240 / 50-60
Electronic power supply (VDC)	20-28 V_DC
Current consumption (A)	0,8
Power (W)	50
Standby power consumption (W)	<0,5

Performance data

Torque (Nm)	6
Nominal speed (rpm)	20
Maximum speed (rpm)*	32
Minimum speed (rpm)	10
Noise level (dBA)**	35
Number of rotations before stop	<150
Operating time (min)	6
Lifted weight (kg)***	22

Dimensional data

Length (L) (mm)	744
Cable length (m)	1,5
Motor weight (kg)	1,5
Operating temperature (°C min/max)	0÷60
Packaging dimensions (mm)	795x100x100

Protection rating: IP30.
* If the speed is set above the nominal value, the motor torque is automatically reduced by 50%.
** Noise measurements were carried out in accordance with EN ISO 7345, EN ISO 3746, and EN 60704-1 standards, expressing the sound power emitted by the source in dBA.
*** Indicative value calculated using a 40 mm diameter roller. The actual value may vary depending on the specific installation.